Synthesizer Wiki - Benutzerbeiträge [de]

InSEQt Handbuch

2010-09-20T16:09:07Z

Tomcat: /* Pre-Patchings */

== Pre-Patchings ==

'''Oberer Teil:'''

CLOCK:
CLK FM ->Clock Frequency
CLK PWM ->Clock Puls WM

CV LFO:
SPEED CV ->ROW B

LEVEL:
MIX IN ->ROW B

MULTI:
1 (über dem M) ->Clock

SLEW:
SLEW IN ->ROW A

S+H:
S+H IN ->PW LFO
TRIGGER ->Clock

DELAY:
DELAY IN ->Clock

LENGTH:
SEQ LENGTH ->16 Trigger/Gate input für Ende

'''Unterer Teil:'''

DIVIDER:
IN ->Gate (CL OUT)

MULTI:
1 (Links vom M) ->Clock

Q (Qunatizier):
1 QUA IN ->CH 1
2 QUA IN ->CH 2 (Bei 2x8)

Oberer Teil by Tomcat, versuch einer Table....:

{| class="wikitable"
|- class="hintergrundfarbe5"
! Buchse !! Art !! Prepatched !! Beschreibung
|-
| colspan="3" | CLOCK:
|-
|CLK FM || IN || || Clock Frequency
|-
|CLK PWM || IN || || Länge des Gates
|-
|EXT CLK || IN || || Externe Clock
|-
|RESE || IN || || Zurück auf Gate 1
|-
|PULSE || OUT || || Gate als Puls
|-
|SQUARE || OUT || || Gate als Sägezahn
|-
|HOLD || IN || || Anhalten (Clock läuft weiter!)
|-
| colspan="3" | GATE:
|-
|GATE 1 - 16 || OUT || || Einzelausgang pro Step
|-
| colspan="3" | PW LFO:
|-
|PULS || OUT || || Rechteck LFO
|-
|RAMP || OUT || || |\ LFO
|-
|SYNC IN || IN || || Zum Synchronisieren
|-
| colspan="3" | CV LFO:
|-
|SQUARE || OUT || || Sägezahn LFO
|-
|TRIANGLE || OUT || || /\ LFO
|-
|SPEED CV || IN || ROW B || Geschwindigkeit
|-
| colspan="3" | LEVEL:
|-
|MIX IN || IN || ROW B
|-
|LEVEL OUT + || OUT
|-
|LEVEL OUT - || OUT
|-´
| colspan="3" | MULTI:
|-
|1 (über dem M) || IN || Clock
|-
|2-3 || OUT
|-
| colspan="3" | SLEW:
|-
|SLEW IN || IN || ROW A
|-
|RESET || IN
|-
|SLEW OUT || OUT
|-
| colspan="3" | S+H:
|-
|S+H IN || IN || PW LFO
|-
|TRIGGER || IN || Clock
|-
|S+H OUT || OUT
|-
| colspan="3" | DELAY:
|-
|DELAY IN || IN || Clock
|-
|DEALY OUT || OUT
|-
| colspan="3" | LENGTH:
|-
|SEQ TR OUT || OUT || || Rechteck LFO
|-
|SEQ LENGTH || IN || 16 || Trigger/Gate input für Ende
|-
| colspan="3" | SEQ OUT:
|-
|ROW A || OUT
|-
|ROW B || OUT
|}

Unterer Teil, Tabellenversuch:

{| class="wikitable"
|- class="hintergrundfarbe5"
! Buchse !! Art !! Prepatched !! Beschreibung
|-
| colspan="3" | CLOCK+TRIGGER:
|-
| START || IN
|-
| START/STOP || IN
|-
| STEP || IN || || Next Step 1
|-
| RESET || IN || || Zurück auf Step 1
|-
| CL OUT || OUT || || Gate (1,2 oder 3)
|-
| QT CLK OUT || OUT || || Quantizer Gate
|-
| OUT BUS 1 || OUT || || Gate 1
|-
| OUT BUS 2 || OUT || || Gate 2
|-
| OUT BUS 3 || OUT || || Gate 3
|-
| colspan="3" | DIVIDER:
|-
| IN || IN || || Gate (CL OUT)
|-
| 1.n || OUT || || Jeder 2/4/8/16/32/64/128.
|-
| colspan="3" | MULTI:
|-
| 1 (Links vom M) || IN || || Clock
|-
| 2-3 || OUT
|-
| colspan="3" | MULTI:
|-
| 1 - 4
|-
| colspan="3" | Q (Qunatizier):
|-
| 1 QUA IN || IN || CH 1 || 1 Bei 1-16 und 1 Bei 2x8
|-
| 2 QUA IN || IN || CH 2 || (Bei 2x8) 2 Bei 2x8
|-
| CV 1 QUA IN || IN || || Add to QUA 1
|-
| 1 QUA OUT || OUT
|-
| 2 QUA OUT || OUT
|-
| colspan="3" | CL P1:
|-
| FM CLK || IN || || Geschwindigkeit
|-
| CLK PWM || IN || || Gate Länge
|-
| OUT POS 1 || OUT || || Gate bei STEP 1|-
|-
| colspan="3" | CH:
|-
| 1 CHA OUT || OUT || || CV 1-16 bzw. 1-8 Bei 2x8
|-
| 2 CHA OUT || OUT || || CV 1-16 bzw. 9-16 Bei 2x8
|-
| colspan="3" | I1:
|-
| 1 INV IN || || IN
|-
| 1 INV OUT || OUT || || - INPUT?
|-
| colspan="3" | I2:
|-
| 2 INV IN || IN
|-
| 2 INV OUT || OUT || || - INPUT?
|-
| colspan="3" | A:
|-
| 1 AND IN || IN
|-
| 2 AND IN || IN
|-
| AND OUT || OUT
|-
| colspan="3" | O:
|-
| 1 OR IN || IN
|-
| 2 OR IN || IN
|-
| OR OUT || OUT
|-
| colspan="3" | X:
|-
| 1 XOR IN || IN
|-
| 2 XOR IN || IN
|-
| XOR OUT || OUT
|}

Noch ein paar Memos um das Chaos vorläufig zu komplettieren:

Zusatzinfos

1. Clock FM -> Bus 1

2. Clock Out -> Multiple (beide 3er Multiples, also jeweils mit der dazu gehörigen Clock)

3. PW LFO -> Clock FM

4. Quantizer vorgepatch (?)

Zusatz-Info: 2. Seq Reihe oben geht bis 10 V.

== Oberer Teil ==

=== Anzahl Schritte setzen ===

Entweder den Gate-Ausgang mit Reset-In verbinden oder mit dem Seq Length Eingang. Beim Reset-Eingang muss man allerdings das Folge-Gate benutzen (2 Schritte = Gate 3 mit Reset-In verbinden, statt Gate 2).

InSEQt Handbuch

2010-09-20T16:08:23Z

Tomcat: /* Pre-Patchings */

== Pre-Patchings ==

'''Oberer Teil:'''

CLOCK:
CLK FM ->Clock Frequency
CLK PWM ->Clock Puls WM

CV LFO:
SPEED CV ->ROW B

LEVEL:
MIX IN ->ROW B

MULTI:
1 (über dem M) ->Clock

SLEW:
SLEW IN ->ROW A

S+H:
S+H IN ->PW LFO
TRIGGER ->Clock

DELAY:
DELAY IN ->Clock

LENGTH:
SEQ LENGTH ->16 Trigger/Gate input für Ende

'''Unterer Teil:'''

DIVIDER:
IN ->Gate (CL OUT)

MULTI:
1 (Links vom M) ->Clock

Q (Qunatizier):
1 QUA IN ->CH 1
2 QUA IN ->CH 2 (Bei 2x8)

Oberer Teil by Tomcat, versuch einer Table....:

{| class="wikitable"
|- class="hintergrundfarbe5"
! Buchse !! Art !! Prepatched !! Beschreibung
|-
| colspan="3" | CLOCK:
|-
|CLK FM || IN || || Clock Frequency
|-
|CLK PWM || IN || || Länge des Gates
|-
|EXT CLK || IN || || Externe Clock
|-
|RESE || IN || || Zurück auf Gate 1
|-
|PULSE || OUT || || Gate als Puls
|-
|SQUARE || OUT || || Gate als Sägezahn
|-
|HOLD || IN || || Anhalten (Clock läuft weiter!)
|-
| colspan="3" | GATE:
|-
|GATE 1 - 16 || OUT || || Einzelausgang pro Step
|-
| colspan="3" | PW LFO:
|-
|PULS || OUT || || Rechteck LFO
|-
|RAMP || OUT || || |\ LFO
|-
|SYNC IN || IN || || Zum Synchronisieren
|-
| colspan="3" | CV LFO:
|-
|SQUARE || OUT || || Sägezahn LFO
|-
|TRIANGLE || OUT || || /\ LFO
|-
|SPEED CV || IN || ROW B || Geschwindigkeit
|-
| colspan="3" | LEVEL:
|-
|MIX IN || IN || ROW B
|-
|LEVEL OUT + || OUT
|-
|LEVEL OUT - || OUT
|-´
| colspan="3" | MULTI:
|-
|1 (über dem M) || IN || Clock
|-
|2-3 || OUT
|-
| colspan="3" | SLEW:
|-
|SLEW IN || IN || ROW A
|-
|RESET || IN
|-
|SLEW OUT || OUT
|-
| colspan="3" | S+H:
|-
|S+H IN || IN || PW LFO
|-
|TRIGGER || IN || Clock
|-
|S+H OUT || OUT
|-
| colspan="3" | DELAY:
|-
|DELAY IN || IN || Clock
|-
|DEALY OUT || OUT
|-
| colspan="3" | LENGTH:
|-
|SEQ TR OUT || OUT || || Rechteck LFO
|-
|SEQ LENGTH || IN || 16 || Trigger/Gate input für Ende
|-
| colspan="3" | SEQ OUT:
|-
|ROW A || OUT
|-
|ROW B || OUT
|}

Unterer Teil, Tabellenversuch:

{| class="wikitable"
|- class="hintergrundfarbe5"
! Buchse !! Art !! Prepatched !! Beschreibung
|-
| colspan="3" | CLOCK+TRIGGER:
|-
| START || IN
|-
| START/STOP || IN
|-
| STEP || IN || || Next Step 1
|-
| RESET || IN || || Zurück auf Step 1
|-
| CL OUT || OUT || || Gate (1,2 oder 3)
|-
| QT CLK OUT || OUT || || Quantizer Gate
|-
| OUT BUS 1 || OUT || || Gate 1
|-
| OUT BUS 2 || OUT || || Gate 2
|-
| OUT BUS 3 || OUT || || Gate 3
|-
| colspan="3" | DIVIDER:
|-
| IN || IN || || Gate (CL OUT)
|-
| 1.n || OUT || || Jeder 2/4/8/16/32/64/128.
|-
| colspan="3" | MULTI:
|-
| 1 (Links vom M) || IN || || Clock
|-
| 2-3 || OUT
|-
| colspan="3" | MULTI:
|-
| 1 - 4
|-
| colspan="3" | Q (Qunatizier):
|-
| 1 QUA IN || IN || CH 1 || 1 Bei 1-16 und 1 Bei 2x8
|-
| 2 QUA IN || IN || CH 2 || (Bei 2x8) 2 Bei 2x8
|-
| CV 1 QUA IN || IN || || Add to QUA 1
|-
| 1 QUA OUT || OUT
|-
| 2 QUA OUT || OUT
|-
| colspan="3" | CL P1:
|-
| FM CLK || IN || || Geschwindigkeit
|-
| CLK PWM || IN || || Gate Länge
|-
| OUT POS 1 || OUT || || Gate bei STEP 1|-
|-
| colspan="3" | CH:
|-
| 1 CHA OUT || OUT || || CV 1-16 bzw. 1-8 Bei 2x8
|-
| 2 CHA OUT || OUT || || CV 1-16 bzw. 9-16 Bei 2x8
|-
| colspan="3" | I1:
|-
| 1 INV IN || || IN
|-
| 1 INV OUT || OUT || || - INPUT?
|-
| colspan="3" | I2:
|-
| 2 INV IN || IN
|-
| 2 INV OUT || OUT || || - INPUT?
|-
| colspan="3" | A:
|-
| 1 AND IN || IN
|-
| 2 AND IN || IN
|-
| AND OUT || OUT
|-
| colspan="3" | O:
|-
| 1 OR IN || IN
|-
| 2 OR IN || IN
|-
| OR OUT || OUT
|-
| colspan="3" | X:
|-
| 1 XOR IN || IN
|-
| 2 XOR IN || IN
|-
| XOR OUT || OUT
|}

Noch ein paar Memos um das Chaos vorläufig zu komplettieren:

Zusatzinfos

1. Clock FM -> Bus 1
2. Clock Out -> Multiple (beide 3er Multiples, also jeweils mit der dazu gehörigen Clock)
3. PW LFO -> Clock FM
4. Quantizer vorgepatch (?)

Zusatz-Info: 2. Seq Reihe oben geht bis 10 V.

== Oberer Teil ==

=== Anzahl Schritte setzen ===

Entweder den Gate-Ausgang mit Reset-In verbinden oder mit dem Seq Length Eingang. Beim Reset-Eingang muss man allerdings das Folge-Gate benutzen (2 Schritte = Gate 3 mit Reset-In verbinden, statt Gate 2).

InSEQt Handbuch

2010-09-20T16:05:20Z

Tomcat: /* Pre-Patchings */

== Pre-Patchings ==

'''Oberer Teil:'''

CLOCK:
CLK FM ->Clock Frequency
CLK PWM ->Clock Puls WM

CV LFO:
SPEED CV ->ROW B

LEVEL:
MIX IN ->ROW B

MULTI:
1 (über dem M) ->Clock

SLEW:
SLEW IN ->ROW A

S+H:
S+H IN ->PW LFO
TRIGGER ->Clock

DELAY:
DELAY IN ->Clock

LENGTH:
SEQ LENGTH ->16 Trigger/Gate input für Ende

'''Unterer Teil:'''

DIVIDER:
IN ->Gate (CL OUT)

MULTI:
1 (Links vom M) ->Clock

Q (Qunatizier):
1 QUA IN ->CH 1
2 QUA IN ->CH 2 (Bei 2x8)

Oberer Teil by Tomcat, versuch einer Table....:

{| class="wikitable"
|- class="hintergrundfarbe5"
! Buchse !! Art !! Prepatched !! Beschreibung
|-
| colspan="3" | CLOCK:
|-
|CLK FM || IN || || Clock Frequency
|-
|CLK PWM || IN || || Länge des Gates
|-
|EXT CLK || IN || || Externe Clock
|-
|RESE || IN || || Zurück auf Gate 1
|-
|PULSE || OUT || || Gate als Puls
|-
|SQUARE || OUT || || Gate als Sägezahn
|-
|HOLD || IN || || Anhalten (Clock läuft weiter!)
|-
| colspan="3" | GATE:
|-
|GATE 1 - 16 || OUT || || Einzelausgang pro Step
|-
| colspan="3" | PW LFO:
|-
|PULS || OUT || || Rechteck LFO
|-
|RAMP || OUT || || |\ LFO
|-
|SYNC IN || IN || || Zum Synchronisieren
|-
| colspan="3" | CV LFO:
|-
|SQUARE || OUT || || Sägezahn LFO
|-
|TRIANGLE || OUT || || /\ LFO
|-
|SPEED CV || IN || ROW B || Geschwindigkeit
|-
| colspan="3" | LEVEL:
|-
|MIX IN || IN || ROW B
|-
|LEVEL OUT + || OUT
|-
|LEVEL OUT - || OUT
|-´
| colspan="3" | MULTI:
|-
|1 (über dem M) || IN || Clock
|-
|2-3 || OUT
|-
| colspan="3" | SLEW:
|-
|SLEW IN || IN || ROW A
|-
|RESET || IN
|-
|SLEW OUT || OUT
|-
| colspan="3" | S+H:
|-
|S+H IN || IN || PW LFO
|-
|TRIGGER || IN || Clock
|-
|S+H OUT || OUT
|-
| colspan="3" | DELAY:
|-
|DELAY IN || IN || Clock
|-
|DEALY OUT || OUT
|-
| colspan="3" | LENGTH:
|-
|SEQ TR OUT || OUT || || Rechteck LFO
|-
|SEQ LENGTH || IN || 16 || Trigger/Gate input für Ende
|-
| colspan="3" | SEQ OUT:
|-
|ROW A || OUT
|-
|ROW B || OUT
|}

Unterer Teil, Tabellenversuch:

{| class="wikitable"
|- class="hintergrundfarbe5"
! Buchse !! Art !! Prepatched !! Beschreibung
|-
| colspan="3" | CLOCK+TRIGGER:
|-
| START || IN
|-
| START/STOP || IN
|-
| STEP || IN || || Next Step 1
|-
| RESET || IN || || Zurück auf Step 1
|-
| CL OUT || OUT || || Gate (1,2 oder 3)
|-
| QT CLK OUT || OUT || || Quantizer Gate
|-
| OUT BUS 1 || OUT || || Gate 1
|-
| OUT BUS 2 || OUT || || Gate 2
|-
| OUT BUS 3 || OUT || || Gate 3
|-
| colspan="3" | DIVIDER:
|-
| IN || IN || || Gate (CL OUT)
|-
| 1.n || OUT || || Jeder 2/4/8/16/32/64/128.
|-
| colspan="3" | MULTI:
|-
| 1 (Links vom M) || IN || || Clock
|-
| 2-3 || OUT
|-
| colspan="3" | MULTI:
|-
| 1 - 4
|-
| colspan="3" | Q (Qunatizier):
|-
| 1 QUA IN || IN || CH 1 || 1 Bei 1-16 und 1 Bei 2x8
|-
| 2 QUA IN || IN || CH 2 || (Bei 2x8) 2 Bei 2x8
|-
| CV 1 QUA IN || IN || || Add to QUA 1
|-
| 1 QUA OUT || OUT
|-
| 2 QUA OUT || OUT
|-
| colspan="3" | CL P1:
|-
| FM CLK || IN || || Geschwindigkeit
|-
| CLK PWM || IN || || Gate Länge
|-
| OUT POS 1 || OUT || || Gate bei STEP 1|-
|-
| colspan="3" | CH:
|-
| 1 CHA OUT || OUT || || CV 1-16 bzw. 1-8 Bei 2x8
|-
| 2 CHA OUT || OUT || || CV 1-16 bzw. 9-16 Bei 2x8
|-
| colspan="3" | I1:
|-
| 1 INV IN || || IN
|-
| 1 INV OUT || OUT || || - INPUT?
|-
| colspan="3" | I2:
|-
| 2 INV IN || IN
|-
| 2 INV OUT || OUT || || - INPUT?
|-
| colspan="3" | A:
|-
| 1 AND IN || IN
|-
| 2 AND IN || IN
|-
| AND OUT || OUT
|-
| colspan="3" | O:
|-
| 1 OR IN || IN
|-
| 2 OR IN || IN
|-
| OR OUT || OUT
|-
| colspan="3" | X:
|-
| 1 XOR IN || IN
|-
| 2 XOR IN || IN
|-
| XOR OUT || OUT
|}

== Oberer Teil ==

=== Anzahl Schritte setzen ===

Entweder den Gate-Ausgang mit Reset-In verbinden oder mit dem Seq Length Eingang. Beim Reset-Eingang muss man allerdings das Folge-Gate benutzen (2 Schritte = Gate 3 mit Reset-In verbinden, statt Gate 2).

InSEQt Handbuch

2010-09-20T15:48:56Z

Tomcat: /* Pre-Patchings */