Weston Pro2021 (Pro One Bausatz)

oli

oli

|||||||||||
Schon mitbekommen?



"PRO2021 is a sonically true-to-form replica of the classic Pro-One monosynth that adds to and improves on the original by using a top-quality semi weighted keybed, rugged formed aluminum chassis, machined aluminum pitch and bender assemblies, and cherry wood ends. The electronics include no rare or hard-to-find parts and include MIDI in/out/through. This is an intermediate to advanced DIY project for those comfortable with through hole soldering, harness wiring, and mechanical assembly."


https://youtu.be/WnLS-dcGxiM
 
oli

oli

|||||||||||
Bei Synthcube gibts auch Kits zu kaufen:

"weston PRO2021 keyboard synthesizer KIT

  • - Formed Aluminum chassis bottom (black anodize with laser etch graphics)
    - Formed Aluminum chassis top (black anodize with laser etch graphics)
    - Bare PCBs (1x "A" Board, 1x "B" Board, 1x PSU Board, 2x VCO Module Board)
    - A-B Interconnect ribbon cable assemblies
    - Shielded cable for audio and MIDI board-to-chassis wiring
    - All pots (11mm) for build (100k Linear and 100k Audio)
    - Machined aluminum custom P2021 pitch bend and modulation wheel assemblies.
    - CNC Machined cherry wood left and right end cheeks (unfinished for your choice of finish)
‘Finishing Kit’ from synthCube

- Music Technologies Group Turbo CPU

- FATAR keybed (semi-weighted, no aftertouch) and ribbon cable

- All PCB parts

- All Panel parts (knobs, switches et al)

- Custom d-shaft ABS black knobs

- All hardware

- Slide switch dust covers (lexan)

- All other cables, wires, assemblies



All you need to supply yourself is small disposable items like solder, shrink wrap tubing and zip ties- and time, of course!

FULL KIT: Total Price $1699 plus shipping

CHASSIS KIT: Total Price $999 (as described above)

KEYBED ONLY : Total Price $99 plus shipping"

 
akula81

akula81

||
"Music Technologies Group Turbo CPU" und "no rare or hard-to-find parts"... also evtl. auch inkl. der umstrittenen Digitalhüllkurven des Behringer...
 
b-funk

b-funk

..
"Music Technologies Group Turbo CPU" und "no rare or hard-to-find parts"... also evtl. auch inkl. der umstrittenen Digitalhüllkurven des Behringer...
Hüllkurven sind AS3310. Ich habe aber auch originale Curtis Hüllkurven eingebaut, konnte nicht wirklich einen Unterschied feststellen. Beim Filter sieht's anders aus: ich bilde mir ein, dass mir hier ein original (Vintage) 3320 besser gefällt als ein AS3320. Wäre jetzt natürlich interessant, noch ein neues Curtis Filter zu testen. So viel zu tun, so wenig Zeit...
 
 


Neueste Beiträge

News

Oben