Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden. Du solltest ein Upgrade durchführen oder einen alternativen Browser verwenden.
News!!!
New clone Prodigy ER-16, modified classic MOOG PRODIGY:
Prodigy ER-16 EURO RACK 42HP
https://www.facebook.com/EnsureSound/
Technical specification same as MOOG PRODIGY...
Modification:
- dual CV for OSC1 and OSC2 (single and dual mode)
- noise generator (white, pink) with noise...
News!!!
New clone Prodigy ER-16, modified classic MOOG PRODIGY:
Prodigy ER-16 EURO RACK 42HP
https://www.facebook.com/EnsureSound/
Technical specification same as MOOG PRODIGY...
Modification:
- dual CV for OSC1 and OSC2
- noise generator (white, pink) with noise level control and output
-...
Hi!
Power to the MIDI controller you can take with the main board +12V and -12V.
I left the only stabilizer + 5V supply for MCU and DAC.
If you look at the circuit, I think it's all clear. :)
Regards,
Ensure Sound
@StormB
Great idea, to make the Prodigy in the classic case! :supi:
I look forward to completing the project, photos and samples!
Best regards,
EnsureSound
For all,
If you have any questions regarding the Moog Prodigy clone DIY.
Write to me in PM, which would not be confused.
Common themes I try to discuss here, and immediately informed of any observations.
I find it easier to quickly answer your question. Then there is no information chaos.
I'm...
For Protonstudio,
If your "pulse wave OSC1" is stable, then nothing changes.
This change is beneficial for the stable operation of the OSC1 pulse wave.
If there is a problem with "pulse wave OSC1" in this case is necessary to replace the resistors.
To avoid confusion further, check your...
I'm very happy for you! Finally all turned out! :phat: :phat: :phat:
What potentiometers is not correct?
There are errors in the wiring guide?
I have to check it out... :agent:
@Binaural
It applies only to those who have purchased, unpopulated PCB.
Your PCB has been carefully tested and calibrated before shipment.
Of course I can not rule that you need to adjust the "TUNE" of OSC 1 and 2.
After the final assembly...
Regards
Dmitry
For those who are building Moog Prodigy clone.
Excellent work transistors J112. I spent testing. Ready 3 boards Moog Prodigy DIY.
Just work exellent 2N5457, is a good choice.
For all!
Documentation for adjustments Moog Prodigy clone DIY.
This is useful for absolutely everyone who builds a Moog Prodigy DIY. :school:
The corrected file, connect CV / GATE / S-TRIG... :selfhammer:
Good luck!
EnsureSound
Transistors 3906 rotate correctly?
I use the same CD4007UBE and everything works fine!
I never had a problem with ADSR in Moog Prodigy DIY.
Somewhere you have an error without an oscilloscope will be difficult to find.
Make high-quality picture of your PCB, by the ADSR. What would have been...
Nothing needs to be connected to the S-TRIG. Use only the GATE and CV.
You need to check each unit ( VCO1, VCO2, VCF. ADSD1, ADSR2, LFO) individually.
Place your order in the chaos, shorten the length of the wires. So it will be easier to deal with problems.
Check again that all components are...
Congratulations! :supi:
Advanced a step further! Surely there are still bugs to be found. :agent:
I have everything working perfectly! Check the assembly, maybe somewhere something's not right.
I advise you to check the circuit responsible for the CV and GATE.
Thank you Nordcore for the sensible remark! :nihao:
Perfectly! :supi: Then the legs can be soldered exactly! No twisting them ...
It is enough to deploy it to 180 degrees, regarding the drawing screen printing.
Example for soldering 2N5457 and J112! Corrected by Nordcore:
3904 and 3906 are soldered correctly!
So check also JFETs.
Use an oscilloscope to check.
Waveform file name correspond to the element, on which should be the wave form.
judging by the pictures, I can already see the error ...
Pay attention to how you have soldered all 3906, because I did beforehand showed that they should be rotated 180 degrees.
After you deploy them at 180 degrees, I hope all the problems go away.
Again! Closely familiarize with the...
Attention all those who build Moog Prodigy clone! :school:
For proper and stable operation of the VCO1 pulse wave.
Resistor R41 must be 18,2K. Resistor R48 must be 38K.
Attention to all who build Moog Prodigy PCB unpopulated! :school:
Note the pinout (GATE, DRAIN, SOURCE) of the N-JFET transistors (Q13, Q16, Q14, Q20).
Depending on what types of transistors you use E112, J112, 2N5457 or 2N4391.
What would be correct to solder them to the PCB.
Use the...