Neues OS - 1.1.0 -
Die Granular Engine ist dazu gekommen:
Es gibt eine Menge Updates: Neue Sample-Formate inkl. Flac, Neue FX Engine, Hochwertige Filterengine für FX…
Für FX: Post Panning!
Improvements
Added a new
granular SRC machine (Grainer).
Added a new
Shape SRC machine for Bus and Send FX tracks.
Added
Undo/Redo functionality for
paste/clear operations of patterns and track sequences.
It is now possible to
preview trigs and notes in GRID RECORDING mode by pressing [TRIG] or [KEYBOARD] + [YES].
The
side chain source parameter is now available on the Compressor FX machine on Bus tracks.
It’s now possible to load
samples in M4A, CAF, and FLAC file formats.
A
POST FX PAN parameter is now added to the FX SETUP MENU for the Audio, Bus, and Send FX tracks.
Added a memory usage entry in file menu.
Improved the sample browser’s look and feel.
Added snap values to the Multi-mode filter’s FREQ and RESO parameters.
The
Multi-mode filter’s FREQ and RESO parameters are now
high-resolution when placed as a
FX machine on Bus or Mix tracks.
Clarified that the LFO destinations in the modulation destination list refer to LFO1.
Added the possibility to name multi-sampled instrument during the auto-sampling process.
Improved several of FX machines’ default value settings.
Changed the default retrig value from 1/4 to 1/32.
Minor improvements to the screen UI and LED indications.
General
performance and
stability improvements.
Bug fixes
USB MIDI input and output had timing problems (jitter).
The MIDI SRC machine’s CC selection parameter responded too slowly when adjusted.
Trigs and sequences copied and pasted between subtracks could misplace parameter locks
The cursor could move past the character limit on the NAMING screen.
Using the recall function or disabling PERFORM mode could reset settings in the MIDI CONFIG menu.
The arpeggiator could play chord notes in the wrong order when retriggered.
The RECEIVE CC setting was disabled by default.
The device did not handle NRPN data.A number of CC mappings were incorrect.
It was not possible to create a new project from the PROJECT menu if the active project had been corrupted.
The device could become unresponsive when saving a project, showing a “Wait” pop-up.
Notes played manually could disappear if SWING was set very high and the sequencer was running.
Clearing a trig with parameter locks on a Subtracks machine’s supertrack did not actually remove the parameter locks.
Trigs placed on a subtrack could sometimes be displayed on the supertrack.
Changing the track SCALE settings could sometimes cause unpredictable behavior.
It was possible to parameter lock the MIDI machine’s CHAN setting, even though it had no effect.
Copying and pasting a pattern could sometimes cause the device to become unresponsive.
Retriggered notes could sometimes fail to play
Loading a project with a lot of sequencer data could cause the device to become unresponsive.
Settings made in the Chrono Pitch FX machine were not saved together with the preset.
It was possible to nudge the tempo even if the device was synced to an external MIDI clock.
Muted subtracks affected mute-mode LEDs after switching to a non-Subtracks machine on the same track.
Projects with a large number of parameter locks could lose those locks and sometimes other data when saving the project.
USB DISK mode could be entered while auto-sampling was in progress.
Copying and pasting empty parameter pages on a supertrack caused the unit to become unresponsive.
When loading multiple samples in the Sample browser, they were randomly assigned to the sample slots rather than in alphabetical order.
The sample playhead was difficult to see on dense sample waveforms on the SRC page.
The LEN indicator could be pushed out of view on the Subtracks machine’s SRC page.
