Adaption unterschiedlicher Module an Stromversorgung

[minstrel]

Wer hat Erfahrung mit dem Einsatz unterschiedlicher Modular-Module an eine
gemeinsame Stromversorgung.
Konkret:
MOON (Modular) und cotk (Club of für Knobs) an (Synthesizers)-DotCom Power.

MOON schreibt:
"– The module format - except our CP-series - follows the industry standard (synthesizers.com/Moog/Curetronic/Mos-Lab etc.)
– The modules work with supply voltages of -15/+15 Volts
(they can be adapted to Moog standard (-6/+12 Volts) or to -12/+12 Volts as custom order - please ask us).

– The faceplates are etched as the original Moog modules. Two power connectors (synthesizers.com/Club of the Knobs) are
on-board as standard, adaptors for other systems are available upon request.)

– Threshold voltage of the trigger inputs is +1 volt. Control voltage range is usually 10 volts."

und CotK bietet eine Adapterplatine an (http://cluboftheknobs.com/technical.html)

Aber,
wie funktioniert das in der Praxis ?
Gibt es entsprechende Kabel / Stecker
oder muss gelötet/ gebastelt werden ?

fragt
Gerd

 

[JohnLRice]

Hello,

A big subject with many variations of what will work! 8)

Basically the adapter boards from COTK and Mos-Lab that are designed to connect to a DotCom power supply and drop the DotCom +-15 volts down to +-12 volts have 6 pin MTA-100 headers on them that you plug one of the cables from the DotCom harness into.
COTK

Mos-Lab

There are a couple good threads on Muff Wiggle about power supplies that you may like:
This one has the excellent image created by sonicwarrior and I've added some info to it:
https://www.muffwiggler.com/forum/viewtopic.php?t=1739

Also this thread has info on making DIY adapter cables you might find interesting:
https://www.muffwiggler.com/forum/viewtopic.php?t=16488

 

[curetronic.com]

 

[Bernie]

Wer hat Erfahrung mit dem Einsatz unterschiedlicher Modular-Module an eine
gemeinsame Stromversorgung.
Konkret:
MOON (Modular) und cotk (Club of für Knobs) an (Synthesizers)-DotCom Power.

Meine Module von Moon funktionieren am Dotcom-Netzteil absolut problemlos.
Bei Club of the Knobs gibt es an manchem Modulen unterschiedliche Varianten (12 / 15 Volt), da sollte man drauf achten.
Hatte mal Probleme damit.
Umgekehrt, also Dotcom- und Moon-Module am CotK-Netzteil klappt dagegen prima.