Arturia Minibrute - Analogsynth

Re: Arturia Minibrute NAMM 2012 - Analogsynth

snowcrash schrieb:
tom f schrieb:
die subs (welche - wenn man unbedingt meint - dem p08 fehlen, was mich aber keine sekunde stört)
Wenn man sowieso einen Juno hat fehlen die Subs natuerlich nicht, fuer geweisse 80er Sounds sind sie allerdings von Vorteil. Relevanter fand ich allerdings das Feedback, nicht wegen dem Krach, sondern, weil man damit sehr subtil nochmal Einfluss auf die Filtercharkteristik nehmen kann, was mir gerade bei diesem Curtissound im Tetra schon eher positiv aufgefallen ist.


grade neulich habe ich beim rumfiedeln festgestellt dass der 08er auch eine richtig oldschooliges s.c.i. resofeeling drauf hat wenn man den sweetspot richtig erwischt - war wiedermal positiv überrascht
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

wieder ein video wie viele andere. mittlerweile sind alle faq's zu dem gerät weit über youtube hinaus bekannt.
warum mal nicht ei tolles video mit viel geschraube. ich glaube die hören sich alle gerne reden.

sorry
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

minibrutemod6.jpg

Nettes Setup ... :mrgreen:
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

und solche spinner werden mit der belieferung bevorzugt.
macht da überhaupt jemand musik mit oder ist das wieder so eine welle?... es ist cool nen analogen synth zu haben.
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

Bei vielen Käufern vom Minibrute die sich bei Youtube präsentieren habe ich das Gefühl die haben sich die Kiste nur gekauft weil sie es konnten. Weder sind die musikalisch noch können die einen brauchbaren Klang herausschrauben. Oder aber der Minibrute ist einfach ohne Seele und die Nutzer sind deshalb total uninspiriert und machen irgendwas, denn immerhin hat dieses irgendwas 500.-€ gekostet. Mal schauen ab wann ich endlich mal Hand anlegen darf um auch dazu zu gehören!!
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

Bei GS gab es jetzt ein sehr interessantes Posting, ich quote mal einfach :

http://www.gearslutz.com/board/8184100-post1908.html

"for you guys that haven't gotten yours yet—don't freak out about it sounding distorted when you first play with it. you literally have to keep the oscillator sliders BELOW 1/4 the way raised (i keep them 1/8th of the way up). i know this was an intentional design choice, but it does seem a little silly to me. any oscillator slider above that will distort the shit out of the filter, particularly when the resonance is in its sweet spot (about 3/4 the way up). it's slightly annoying to me, only because i don't get as much output gain as i'd like. but, thankfully there isn't any noise in the outputs even with the volume all the way up and the oscillators at a low output.

this is the reason all the youtube demos sound so distorted; it isn't actually the brute factor (which i've found to be really useful actually to fatten things up and add interesting nuances without really distorting things, like you'd assume). "
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

darsho schrieb:
Bei GS gab es jetzt ein sehr interessantes Posting, ich quote mal einfach :

http://www.gearslutz.com/board/8184100-post1908.html

"for you guys that haven't gotten yours yet—don't freak out about it sounding distorted when you first play with it. you literally have to keep the oscillator sliders BELOW 1/4 the way raised (i keep them 1/8th of the way up). i know this was an intentional design choice, but it does seem a little silly to me. any oscillator slider above that will distort the shit out of the filter, particularly when the resonance is in its sweet spot (about 3/4 the way up). it's slightly annoying to me, only because i don't get as much output gain as i'd like. but, thankfully there isn't any noise in the outputs even with the volume all the way up and the oscillators at a low output.

this is the reason all the youtube demos sound so distorted; it isn't actually the brute factor (which i've found to be really useful actually to fatten things up and add interesting nuances without really distorting things, like you'd assume). "


ja wie ich schon geschrieben habe, jeder honk hat nun nen brute. da die aber sowas von keine ahnung haben wie mann einen tollen sound baut klingt das alles sch.... .

denke das sich hier wie immer die spreu von den weitzen trennt.
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

darsho schrieb:
Bei GS gab es jetzt ein sehr interessantes Posting, ich quote mal einfach :

http://www.gearslutz.com/board/8184100-post1908.html

"for you guys that haven't gotten yours yet—don't freak out about it sounding distorted when you first play with it. you literally have to keep the oscillator sliders BELOW 1/4 the way raised (i keep them 1/8th of the way up). i know this was an intentional design choice, but it does seem a little silly to me. any oscillator slider above that will distort the shit out of the filter, particularly when the resonance is in its sweet spot (about 3/4 the way up). it's slightly annoying to me, only because i don't get as much output gain as i'd like. but, thankfully there isn't any noise in the outputs even with the volume all the way up and the oscillators at a low output.

this is the reason all the youtube demos sound so distorted; it isn't actually the brute factor (which i've found to be really useful actually to fatten things up and add interesting nuances without really distorting things, like you'd assume). "


ja wie ich schon geschrieben habe, jeder honk hat nun nen brute. da die aber sowas von keine ahnung haben wie mann einen tollen sound baut klingt das alles sch.... .

denke das sich hier wie immer die spreu von den weitzen trennt.
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

citric acid schrieb:
ja wie ich schon geschrieben habe, jeder honk hat nun nen brute. da die aber sowas von keine ahnung haben wie mann einen tollen sound baut klingt das alles sch.... .

denke das sich hier wie immer die spreu von den weitzen trennt.

bist du traurig :hasi: weil du nicht mit einer der ersten bist :streichel:
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

nein. aber ich glaube nicht das die schon ijanuar auf der namm bestellt haben.
sollen halt nur alle gleich behandeln und nicht nur die sch. ammies als erstes beliefern. die machen eh nur hip hop damit :kaffee:

nee spass bei seite. sind doch fast alles musikalische nullen die den brute bis jetzt haben.

angeblich soll deutschland ja ein wichtiger markt für die wirtschaft sein,aber das ist es nun mal für arturia nicht.
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

Mir isses voellig egal wer den sonst noch hat und was er damit macht... sobald ich endlich meinen hab. :selfhammer:
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

Also am 31.8.2012 bei Music Store erhälltlich laut Internetseite und am 14.09.1980 bei Thomann, ich frage mich gerade wer alles bereits bestellt hat? Laut Thomann sollen sie nur 1 Stück kriegen...scheint ja wirklich sehr nett zu sein..
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

ja da ich ja schon 2 bei korn bestellt habe , bleibt für den store nichts über.
also wenn die erste charge so klein ost das jeder händler nur 1-2 bekommt . dann bekommen wir die brutes erst 2020.
aber ich sehe das derweil entspannter. wenn das halt nicht kommt.
hole ich mir was anderes oder spare für nen origin, der ist zwar digital aber den brauch ich auch noch.

also fr@nk, jetzt nicht falsch verstehen und korn nicht beliefern .... grinz
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

Ich hab mein MB Geld eh schon anderweitig verplant, sind ja noch andere interessante Sachen erschienen inder Zwischenzeit :)
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

also ich habe gestern mit dem musicstore telefoniert und der nette herr am telefon sagte mir, das der store 130 !!! minibrute's bestellt hat. ich könnte beruhigt sein, da meine bestellung ( vor 7 monaten ! ) auch ganz weit vorne liegt. aber alle würden auch einen bekommen. na dann bin ich mal gespannt, ob der container voll mit kleinen brutes morgen in kölle eintrifft... :| :roll:
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

Wow genial, da bin ich beruhigt, kann es auch kaum abwarten...wenn Sie 130 Stück haben schaut es denke ich ganz gut für alle aus die bestellt haben... :mrgreen:
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

Hmm meinst du nicht? Meinst du die Produktion ist oder war so gering? Würde sich doch nicht lohnen..oder?
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

zOrg schrieb:
Hmm meinst du nicht? Meinst du die Produktion ist oder war so gering? Würde sich doch nicht lohnen..oder?


heute wird zumeist immer just in time produziert.
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

ich denke nicht das die so einen grossen output haben.

kann ja nicht jeder so schnell produzieren wie wir hier in unserer firma. hier gehen 16 millionen Telefone im jahr herraus.

ok ein dect telefon ist viel viel kleiner ...grinzzzzzz
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

chain schrieb:
zOrg schrieb:
Hmm meinst du nicht? Meinst du die Produktion ist oder war so gering? Würde sich doch nicht lohnen..oder?
heute wird zumeist immer just in time produziert.
Soweit ich das für diverse Synthhersteller kenne: Schön wärs. Just in Time, das können Automobilbauer und ähnliche Großunternehmen fordern. Bei den üblichen SynthFirmen weiss ich, dass die dann oft 14 Tage nochmal auf irgendein Bauteil warten, das der Hersteller erst wieder auflegt, wenn genügend Bestellungen da sind. Mit der Wartezeit ist dann Dein Timeslot beim Platinenbestücker futsch, woraufhin sich die ganze Produktion um ein viertel Jahr verschiebt.
 
Re: Arturia Minibrute NAMM 2012 - Analogsynth

Highpass schrieb:
also ich habe gestern mit dem musicstore telefoniert und der nette herr am telefon sagte mir, das der store 130 !!! minibrute's bestellt hat. ich könnte beruhigt sein, da meine bestellung ( vor 7 monaten ! ) auch ganz weit vorne liegt. aber alle würden auch einen bekommen. na dann bin ich mal gespannt, ob der container voll mit kleinen brutes morgen in kölle eintrifft... :| :roll:
und, ist er eingetroffen ?
 


Neueste Beiträge

News

Zurück
Oben